Basic Info.
After-sales Service
10 Years
Certification
CE, FC Ukca PSE
Surface Treatment
Anodzised
Name
Heat Powered Stove Fan
Use
Home Appliance of Hot Air Fan
Effect
High Efficiency Ecofan Firplace Fan
Parts
Fireplace Accessories Metal Fan
Cooling Fan
Axial Fan Exhaust Fan
Transport Package
Paper Carton
Product Description
PRODUCT SPECIFICATION | |
STOVE FAN | Product Size: Dia165*H190 mm |
Model No: LT385-4 | Operating Temperature: 60-345 degree |
Powered : Heated Powered | Maximum Wind Speed: 352 ft/m |
Material: Aluminium Alloy | Motor Speed: 1000-1400RPM |
Number of Blades: 6 | Maximum Air Volume: 79.2 CFM |
04) WELCOME
Thank you for choosing to purchase the stove fan from us, The device is intended exclusively for domestic use, not for commercial applications or use in hospitals or medical offices.
Please read the entire manual carefully prior to first use and keep it in a safe place for future reference. It will be helpful in case you hand this device over to another person.
Further information can be found on our email US.
05).STORAGE AND PERIODIC INSPECTION
The stove fans do not require particular maintenance in normal operation, wipe it with a clean damp cloth if needed.
Do not immerse in water or any cleaning solution.
Safely store the fan in the original packaging during the off-seasons.
06) TROUBLESHOOTING
TROUBLESHOOTING | | |
Fan not turning | The furnace temperature is too high, burning out the heating element. | It is recommended to place a thermometer on the furnace surface and observe whether the temperature exceeds 345 degrees |
Blade vibration | During transportation the product was damaged. | You can contact customer service to obtain fan blade adjustment video |
Loud noise | Loose motor screws | 1: Check the motor of the detachable fan and adjust the screw. 2: Or contact customer service to obtain videos such as adjusting the loosening of motor screws. |
The fan starts and stops | The motor is heated unevenly | 1: Place a thermometer to measure whether the temperature of the firplace reaches the starting temperature. 2: The fan motor and heating sheet can be disassembled, and check that the connection is in tight contact. |
07: DISPOSAL OF USED ELECTRONIC DEVICES
This markin gindicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environ-ment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.To return your used device, please use the return and collection systems of contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
08: WARRANTY AND REPAIR TERMS
Stove fan coms with a 12-month hassle-free warranty from the data of purchase.
If your would like to obtain a warranty or have any toher questions regarding this product, please email US,we will get back to you soon.
Please read these instructions carefully to avoid injury and to help maintain the product, prevent damage.
How to use the stove fan
Front view and Rear view
1) Hold here
Ensure handle is upright before placeing on stove,
2) Thermoelectric module
3) ooling fans
4) Base
DANGER : the base is hot when in use DO NOT TOUCH!!!
5) Heat sensitive metal
A safety device to protect the motor from overheating when the surface temp exceeds 250 degree( 482 F)
Operation
Put the stove fan in the top surface of the stove,in the right or left side of the chimney.
Do not over 350 degree (662 F)
The opt imum operating temperatures shown are for reference and guide only, they may vary in different environments as they have been tested in controlled laboratory conditions,
The optimum operating temp is 80-250 degree ( 176-482F).
DO ONT OVER 350 degree( 662 F)
A stove fan thermometer is recommended to monitor the temp, to avoid damage to the components due to overheating.
Never place the fan on an unprotected surface in the fan base is still hot.
Not recommended to move the fan when in use unless in an emergency, On this occasion.
remember to wear gloves to protect against burns or injury by the rotating blades.
Keep all obstacles at a disance while the fan is in use.
Please ensure children and pets are supervised aground your stove and the stove fan,
Start temp 60 degree the fan will spin faster as the temperature increases and will slow down as it decreases,
the fan base will cooling along with the stove once the fuel has burnt.
The stove fans do not require particular maintenance in normal operation; wipe it with a clean damp cloth if needed, Do not
immerse in water or any cleaning solution.Safely store the fan in the original packaging during the off-seasons.
Your stove fan is covered by warrangty from any manufacturing defect of workmanship for period of oneyear, from the fate of purchase.
this warranty does not cover accidental damage nor covered for abnormal use this warranty daes not affect your staturtory rights.
Should the stove fan become defective or fail to operate under normal conditiions, within the warranty period' simply contact the store where
the fan was purchased; providing proof,. if required, for a returns cliam to beraised.
All packaging materials and cardboards used arerecyclable.
The manufacturer reserves the right to improve and amend the product design and the manual
which aresubject to change without further notification.
=====================================================================================
=====================================================================================
Mia&Coco Ofenventilator ohne Strom 6 Flugel mit Thermometer, Kaminventilator Magnetisch Ofenventilator Leise, Schwarz
$119.00 $89.00
Rated 5.00 out of 5
( WARMEBETRIEBEN, ENERGIEEFFIZIENT) Dieser Ofenventilator wird durch
die Umwandlung von Warme in Energie angetrieben, ohne dass eine
Batterie oder Elektrizitat benotigt wird. Wenn die Oberflache des Kamins
80°C erreicht, beginnt der Ventilator zu laufen und verteilt die Warme
des Holzofens im ganzen Raum. Auf diese Weise sparen Sie 15 bis 28 % der
Holzkosten und reduzieren die Brennstoffemissionen, was das Gerat zu
einer umweltfreundlichen Wahl macht.
(EIGENSCHAFTEN) Ofenventilator ohne strom, Material: [Eigenschaften] ) ofenventilator Ohne Strom, Material:
Aluminiumlegierung, Nettogewicht: 545g. Produktgroße: Ø165*H190mm,
Flugeldurchmesser: 165mm. Anlauftemperatur: 80°C, Arbeitstemperatur:
80ºC-350ºC, Maximales Luftvolumen: 79.2 CFM, Maximale Windgeschwindigkeit:
352 ft/min. Lautstarke ≤ 25dB.
( GLEICHMAßIGE WARMEVERTEILUNG ) Der Kaminventilator verfugt uber 6
Flugel fur eine gleichmaßige Warmeverteilung und ein großes Windvolumen.
Sorgfaltig entworfene Flugel sammeln und reduzieren den Widerstand und
ermoglichen eine Luftergeschwindigkeit von bis zu 352 ft/ min.Der
Ventilator fur kaminofen kann die Raumtemperatur schnell erhohen und
eine gleichmaßige Warmeverteilung im Raum erreichen, so dass Sie
angenehm warm bleiben.
[EINFACH ZU BENUTZEN, LEISE] ) Große 165 x 190mm. Dieser
Ofenventilator ist klein und kompakt mit einem Griff fur eine einfache
Verwendung. Stellen Sie ihn einfach auf eine flache Oberflache auf Ihrem
Kamin, wahrend er in Betrieb ist. Der Kaminofen-Ventilator lauft leise
und macht selbst bei hochster Geschwindigkeit nur wenig Larm. So bleiben
Sie kuschelig warm, ohne abgelenkt zu werden.
Buy on Amazon
SKU: DE-STOVEFAN-KIT Category: Stove Fans
Description
Mia&coco Ofenventilator ohne Strom, keine Stecker, keine Batterien
Die automatische Erzeugung hoher Heiztemperaturen verbessert die
Warmluftzirkulation fur mehr Komfort und reduziert den Bedarf an
Brennholz um ca. 15%-28%, wodurch die Brennstoffemissionen reduziert und
die Energieeffizienz verbessert werden.
Korrekte Anwendung
Stellen Sie den Ventilator fur Kaminofen auf eine der beiden Seiten der Oberflache des Kamins auf, nicht in der Mitte.
Gerauscharm and leise
Der Gerauschpegel des Ventilators betragt weniger als 25 Dezibel.
Selbst bei hochster Geschwindigkeit ist er nahezu gerauschlos. Selbst bei Hochster geschwindigkeit ist er Nahezu Gerauschlos.
Uberhitzungsschutzfunktion
Wenn die Oberflachentemperatur 250 °C uberschreitet, springt die
Sicherheitsvorrichtung sanft hoch, um den TEG und den Motor zu schutzen. Sicherheitsvorrichtung Sanft Hoch, um den teg und den motor zu Schutzen.
Energiesparen
selbst erzeugte Energie, ohne Strom, keine Stecker, keine Batterien.
Wird hauptsachlich bei Holzkaminen oder anderen Heizofen mit relativ
hoher Temperatur verwendet, um die Luftzirkulation im Raum zu verbessern
und die Warme im gesamten Wohn-oder Schlafzimmer zu verteilen.
Gleichmaßige Warmeverteilung: Andern Sie die Richtung des Kaminofens, um
die horizontale Warmezirkulation zu fordern, die Innentemperatur
schnell zu erhohen, die Heizung gleichmaßiger einzustellen und Brust,
Vorder- und Ruckenbereich gleichmaßig warm zu halten.
==========================================================================================
Address:
No. 35, Dalang Road East, Baiyun Lake Street, Baiyun District, Gz, Guangzhou, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Arts & Crafts, Auto, Motorcycle Parts & Accessories, Computer Products, Construction & Decoration, Consumer Electronics, Electrical & Electronics, Furniture, Lights & Lighting, Manufacturing & Processing Machinery, Tools & Hardware
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, HSE, ISO 14064, QC 080000, GMP, BSCI, BRC, SA 8000, QHSE, HACCP, BS 25999-2, ISO 13485, EICC, ANSI/ESD, SEDEX, ISO 22000, AIB, WRAP, GAP, ASME, ISO 29001, BREEAM, HQE, SHE Audits, IFS, QSR, ISO 50001, LEED, PAS 28000, FSC, ISO 10012, ISO 17025
Company Introduction:
We are OEM service in China, (We are an integrated manufacturer of aluminium extrustion profile), Number of employees: 6000-7000 people. Certificate: ISO 14001: 2004, ISO9001: 2008.
Our Company: GuangZhou Qiande Industrial Co., Ltd. Pls see the attached business licence and the registration form for foreign trade manager. Registered capital of 10 million.
We have been in the aluminium alloy extrusion profile business for 30 years, Supported by high technology and equipped with advanced production and inspection equipment, we have established a complete production system from alloying, tooling, extrusion, fabrication, CNC machining, finishing (mirror polishing, sandblasting, brushing, chrome plating, anodizing with/without color, hard anodizing, powder coating, silk screening and painting) to welding and assembly.
Currently we are exporting to worldwide. Monthly capacity 2800 tonnes. Our pricing, quality and prompt delivery are well, received by our customers, All interested buyers are visit our aluminium extrusion factory in China.
Are you need aluminium products and heatsinks? Pls contact with me.